May
26
2016

Order Tara's Bicycle Touring Cookbook Today!

Preparing the Workshop for a Plastering Crew, Part Two

by Going Slowly

While building our cottage we learned the value of mechanical ventilation. As it turns out, the thing is practically airtight. If we leave it entirely closed up for more than a few days, the air inside gets stale and musty. Thankfully, it's small enough that leaving a window cracked solves the issue. In the workshop, we've decided to address air exchange systematically with an energy efficient HRV, or heat recovery ventilation system.

During our strawbale building workshop, Andrew and the participants left a hole in the building where we'd planned to install the HRV.

Finished Grindbygg Exterior Plaster

This weekend, we finally tackled the project of closing up the wall and installing ductwork.

Tara Marking 2x4 For Workshop Wall Tara Cutting 2x4 For Workshop Wall Tara Cutting Rigid Foam Insulation for Workshop Wall Tara Measuring Workshop Wall Tara's Cookbook in Wall (Time Capsule) Workshop HRV Wall Hyrdonic Heat Tube Cubby in Workshop

Once everything was closed up, we mixed plaster and covered the finished wall, hydronic heat tube box, and several random unplastered parts of the building. So many weird areas to fix! All in all, it turned out nicely.

Mixing Plaster Workshop HRV Wall & Hydronic Heat Tube Cubby After Plastering Hydronic Heat Tubing Cubby in Workshop After Plastering